SKF TIH030M [TIH 030M/230V] Small Induction Heater, 230V, (Weighing Up To 40 kg)

The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The induction heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The induction heating system is supplied standard with three yokes and is available in two executions: 230V/50-60Hz and 100-110V/50-60Hz. 

Features:

• Compact lightweight design; just 20,9 kg (46.0 lb) facilitating portability
  
• 2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption>
  
• Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
  
• Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
  
• Automatic demagnetisation
  
• This induction heating system is warranted for 3 years
  
• 230V, Non-US version does not include a finished plug.
  

What's In The Box:

• (1) TIH 030M in selected voltage
  
• (1) TIH 030-Y2 Yoke 14 x 14 x 215 mm
  
• (1) TIH 030-Y4 Yoke 28 x 28 x 215 mm
  
• (1) TIH 030-Y7 Yoke 45x 45 x 215 mm
  

Brochure/Datasheet

Instruction manual

---

Note: Prices are not binding , subject to change without prior notice